TAD-N-PU-2C
CONTACT Téléchargements TAD-N-PU-2C Data Sheet Commande d’échantillonnageTAD-N-PU-2C is a thermally conductive two part thixotropic PU-adhesive with thermally conductive fillers in both components. It cures once the two parts come into contact without requiring heat or primer. It has good wetting and high bonding adhesion to most surfaces. The system cures at room temperature or by accelerated heat.
Because of its thixotropic properties, the material can also be used as dispensable 2 part form-in-place gap filler that cures precisely positioned in place. This allows for compensating extreme tolerances and spaces at non-coplanar systems.
PROPRIÉTÉS
- Thermal conductivity: 2 W/mK
- Very high bonding properties
- Extraordinary chemical resistance and longterm stability
- Zero stress on components
- Heat accelerated curing
DISPONIBILITÉ
- 400 ml (2 x 200 ml) twin cartridges
- 2 x 1 kg cans
- 18 l in pails
EXEMPLES D'APPLICATION
- LED systems
- Processor cooling
- Memory chip assembly
- CPU boards
- EHV battery systems
OVERVIEW
Property | Unit | A-Komponente | B-Komponente |
---|---|---|---|
Material | Polyurethan | Polyurethan | |
Colour | Black | White | |
Viscosity @ 5 rpm / 10 rpm | Pas | 320 / 280 | 272 / 165 |
Viscosity (Mixed) @ 5 rpm | Pas | 520 | 520 |
Density | g/cm³ | 2,3 | 2,6 |
Gravity (Mixed) | g/cm³ | 2,45 | 2,45 |
Hardness | Shore D | 70 | 70 |
Mixing Ratio | Volume | 1:1 | 1:1 |
Tensile Shear Strength (Al) | MPa | 9,5 | 9,5 |
Tensile Strength | MPa | 14,0 | 14,0 |
Elongation | % | 30 | 30 |
Shelf Live (@ 25 °C) | Months | 6 | 6 |
Curing Time @ 25 °C | < 24 h | < 24 h | |
UL Flammability | UL 94 | V0 | V0 |
RoHS Conformity | 2015 / 863 / EU | Yes | Yes |
Thermal | |||
Thermal Conductivity | W/mK | 2,0 | 2,0 |
Operating Temperature Range | °C | - 40 bis + 85 | - 40 bis + 85 |
Electric | |||
Dielectric Strength | kV/mm | 13,5 | 13,5 |
Volume Resistivity | Ohm - cm | 4,55 x 1012 | 4,55 x 1012 |